Our Products - Etch Primer Paint - SPECTRACOAT
| TECHNICAL DATA SHEET |
| Product Description |
It is vinyl ester resin based two component primer. It dries very quickly and orms anticorrosive coating having excellent adhesive properties. |
| Recommended Uses |
This is used as a primer on Aluminium and Galavanised steel to promote the adhesion of subsequent coatings. |
| PRODUCT SPECIFICATION |
| Mixing Ratio |
1:1 |
| Colour |
yello Green |
| Finish |
Matt |
| Pot Life |
6to 8 hrs. |
| Volume Solids |
10 % � 2 |
| Flash point |
More than 12 �C |
| Recommended DFT |
7-8 microns per coat |
| Covering Capacity |
12 to 14 sq. mtrs / ltr |
| (Theoretical) |
- |
| Drying Time |
Surface dry – 10 to 15 mins at 30 �C & 65 % Relative Humidity.
Hard Dry – 4 - 6 hrs at 30 �C & 65 % Relative Humidity |
| Recoating Time |
Min 6 to 8 hrs. at 30 �C & 65 % Relative Humidity Max - None |
| Method of Application |
Conventional Spray |
| Thinner recommended |
'Spectracoat’ Epicor Thinner |
| Shelf life |
12 months under normal storage conditions in original sealed containers and in separate packs.
|
| Surface Preparation |
Surface should be free from mill scales , rust , oil , grease , moisture and any other foreign matters. |
| Subsequent Coat |
As per recommended coating system. |
| Remarks 1. Application Data |
| Method |
Pressure ( Atm) |
Nozzle |
Thinner |
Thinner volume |
| Conventional Spray |
3 – 4 |
|
Spectracoat Etch Thinner |
10 – 30 % |
2. Don’t use below 10 �C
3. Stir well before and while using .
4. Film thickness other than indicated also possible.
| Safety Precautions : |
| Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air. |
Keep the material away from heat , spark and direct flame |
| Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
skin and eyes. |
In case of contamination , rinse with fresh running water and seek medical help at once. |
| Follow local & national safety rules. |
| Special Comments : |
| Thinner consumption and actual coverage of paint depends on the site conditions. |
Stir the paint well before painting and while painting if necessary. |
| Material should be stored at 30 �C temperature in dry place.
|
